Concrete Mold Form Release Agent, Crete Lease 880 Spray Cresset

Concrete Mold Form Release Agent, Crete-Lease 880 Spray

Sale price$24.09
Quantity:
Fast Ship: Usually takes 1-2 business days to ship out.

Concrete Mold Form Release Agent, Crete-Lease 880 Spray

  • The environmentally friendly industry staple Crete-Lease 880 is a proprietary blend is comprised of neutralized vegetable oils in mineral oil that contains no waxes, silicones, or carcinogens; it's also solventless and non-toxic.  Notably, this advanced composition exceeds Federal, OTC State, and California (250 g/L) VOC regulations.  The end result mimics the surface of molds and site amenities with a superior finish for visually stunning concrete surfaces – without bugholes.

  • Crete-Lease 880 is available in cans as an aerosol release, or gallon jugs. Case quantity and Gallon sizes are sold here.
  • Uses include: rubber (polyurethane) molds, fiberglass molds, form liners, and concrete forms and casting (880-VOC is not for natural rubber or latex- use the 20-VOC-XTRA Release product for natural rubber or latex molds) 

  • Crete-Lease 880 permits easy, stain-free removal of forms, formliners, pallets, etc. from hardened concrete
  • Cuts form clean-up time up to 70% when properly applied
  • Reduces bugholes on concrete surfaces
  • Doesn't interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied
  • Sprays upside down, or rightside up
  • Can be applied in sub-freezing or very hot temperatures
  • Reduces incidences of skin rashes
  • Promotes longer form life by acting as a water repellent from inside the wood
  • Produces high visual impact (CCS 1) concrete surfaces
  • Does not stain or stick from steam curing
    • Limitations: A) Not recommended for forms or form liners made from expanded polystyrene, SBR, or natural rubber, or latex. B) Although subfreezing temperatures have no effect on the releasing action of Crete-Lease 880, temperatures below freezing promote thicker film thicknesses which causes more bugholes.
  • Applicable Standards: exceeds California's SCAQMD rule 1113-90 (250 g/L). "Cresset Concrete Standards", a photographic appearance guide. Corps of Engineers, "Civil Works Construction Guide Specifications," CW-03101, Section 5.3 and Section 8. Corps of Engineers, "Guide Specification Military Construction," CEGS-03300, Section 10.8.

Concrete Mold Form Release Agent, Crete-Lease 880 Spray Technical Data:

  • 880-VOC Release Data Sheet
  • Coverage: 1500 sq. ft. per can (Aerosol- Please note that Aerosols cannot ship via Air (Next Day, 2-Day, or 3-Day Select)
  • Coverage (hard/smooth surface): 1,600 sq. ft. per gal
  • Coverage (pre-oiled plywood): 1,100 sq. ft. per gal
  • Coverage (untreated plywood): 800 sq. ft. per gal
  • Color: Straw
  • Opacity: Clear
  • Freeze Damage: None. Freeze Temperature: -15F
  • Flash Point: Not applicable
  • Viscosity (centipoises): Not applicable
  • Solids: None
  • Density: 7.37 lbs/gal
  • VOC (Volatile Organic Compounds): 245 g/l
  • Composition: A proprietary blend of neutralized vegetable oils in mineral oil. Contains no waxes, no silicones, no carcinogens.

Form Material Compatibility:

  • Plywood: All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO). Fiberglass, ABS, PVC, Epoxy, Urethane, Silicone, Steel, Aluminum, Wood.

Application:

  • Apply minutes, hours, or days before placing concrete.
  • Form surfaces must be clean, and dry.
  • For best results, apply an ultra-thin film.
  • Spray or wipe the release on. If runs or puddles occur, wipe them off.

Customer Reviews

Based on 14 reviews
86%
(12)
14%
(2)
0%
(0)
0%
(0)
0%
(0)
B
Bart D O'Sullivan
Very Good

I reccomend this product if you're purchasing liner. Works great and makes liner cleanup a breeze.

R
Robert Pierce
Worked Awesome on Melamine

Does exactly what it is supposed to do. Had no problem separating molds from project. Literally no adhesions anywhere.

C
Christopher Smith
Works like it should

Good

T
Terry Alexander
Release

The material worked great.

S
Sue Thompson
Works well

It's easy to apply and worked well on not only the sink mold, but helped with easy removal of the melamine forms as well.